4-5.5″ Stage 5 Coilover Conversion System Kit

Part Numbers & DetailsKit ContentsYou’ll be getting one Stage 5 Coilover Conversion System.Multiple Warranties1 Year Warranty for Shock Absorbers. Limited Lifetime Warranty for Box Kit, Coil Springs, Track Bar Bracket, Track Bar, Radius Arm Brackets, Steering Stabilizer Bracket, Blocks, U Warranty for Bolts. Excludes Wearable Items.Kit Contents Detailed64051x1 Fsd Front Box Kit, 61721Cx1 Fsd Coilover Kit, 64039×1 Bump Steer Bracket, 64038×1 Fsd Track Bar, 64046×1 Radius Arm Drop Kit, 65053×1 Steering Stabilizer, 195275×1 Fsd 5″ Blocks, 67003×1 Fsd U-Bolt Kit, 37705CPx1 Fsd Rear ShocksTech NoteDue to tight clearances and varying placement of vehicle”™s wiring harness in the upper front-passenger wheel well area, installer must ensure adequate clearance between the harness, coilover reservoir, and other components to prevent chafing/damage to wire harness. If adequate clearance cannot be achieved, please contact ICON Customer Service., If installing with ICON 2.5 Series remote reservoir secondary shocks, reservoir doubler kit part number 611003 is also required, Super Duty diesel models equipped with Tremor package will have front lift height range of 3-4.5″ over stock, Super Duty diesel models without Tremor package will have front lift height range of 4-5.5″ over stock, Super Duty gas models equipped with Tremor package will have front lift height range of 3.5-5″ over stock, Super Duty gas models without Tremor package will have front lift height range of 4.5-6″ over stockSpecifications

Product Details

ICON’s 4-5.5″ Lift Stage 5 Coilover Conversion System features 2.5 Series CDCV remote reservoir coilovers that provide superb on-road comfort and off-road performance while at the same time allowing for end-user ride height adjustability. These bolt-in coilovers also allow the option to mount secondary shocks in the stock location, effectively doubling shock damping ability. Their remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. Fabricated radius arm drop brackets correct suspension geometry and ensure proper wheel alignment with the OE radius arms. The fabricated track bar drop bracket allows the axle to be properly centered under the frame and reduces road feedback throughout the steering system with improved on- and off-road manners thanks to the elimination of bump steer. An adjustable track bar allows for on-vehicle adjustment to fine tune track alignment as well as eliminating the deflective OE track bar bushings for an overall more rigid unit to improve the vehicles handling characteristics.

Compatibility List