3.0 VS RR CDXS Coilover Kit

Part Numbers & DetailsKit ContentsYou’ll be getting one 3.0 VS RR CDXS Coilover Kit.Multiple Warranties1 Year Warranty for Shocks. Limited Lifetime Warranty for Coil Springs.Important Fitment NoteAlso Requires Part Number 66203. Raises Front 1.5″ – 2″. 6mm Offset Aftermarket Wheels Recommended. w/ Tremor Package.Designed for 4WD vehiclesThis product only works for 4WD vehicles.Important Fitment NoteUse Up To 35″ x 12.50″ Tires. Up to 37×12.50″ Tire w/ Minor Fender Trimming. w/ 3″ Maximum Lift RearImportant Fitment NoteRequires Recalibration of Advanced Driver Assistance Systems (ADAS) After Install. Requires removal of the coil centering cup in factory coil bucket. Use w/ Track Bar Bracket Part Number 64039Tech NoteMost Sequoia submodels will have front lift height range of 3-4.5″ over stock. Submodels equipped with TRD Off-Road Package or TRD Pro will have front lift height range of 1-2.5″ over stock., Most Tundra sub-models equipped with i-Force gasoline engine will have front lift height range of 1.25-3.25″ over stock, Most Tundra sub-models equipped with i-Force MAX hybrid engine will have front lift height range of .75-2.75″ over stock, Tundra lift heights above 2.25″ require sway bar drop bracket kit part number 55154. Required for all lift heights on Tundra TRD Pro and Sequoia. When installing 55154 on model equipped with TRD Off-Road package or TRD Pro, part number 55164 is also required., Tundra SR5 equipped with TRD Sport Suspension package will have lift height range of 2.25-4.25″ over stock, Tundra TRD Pro will have front lift height range of 0-1.5″ over stockApplication NoteFor 4WD Models Without TRD Off-Road Package ICON Recommends Using ICON Diff Drop (Part 55156) Or Using Toyota TRD Axles (Part 434200C020 Driver / 434100C020 Pass). Failure To Do So Could Result In Front Axle Damage. Not Required For TRD Pro., ICON Delta Joint Pro upper control arms required, Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles, Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install, If equipped with TRD aluminum skid plate part 55164 is also required, Shocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle., Advertised Lift Height Ranges Are For A Stock Equipped Vehicle. Increasing Weight Of Vehicle Due To Accessories Will Alter Lift Range.Recommended Aftermarket35″ x 12.50″ (Minor fender trimming and modifications may be required), ICON Alloys – 17×8.5″ w/ 5.75″ Backspace / 25mm Offset, ICON Alloys – 18×9″ with 6.00″ Backspace / 25mm OffsetSpecifications

Product Details

3.0 Series shocks boast 50% more piston surface area in the ride zone of the shock’s travel, and 100% in the “œBump Zone”, compared to 2.5 Series shocks. This translates into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions. The multi-stage hydraulic Bump Zone featured in these 3.0 Series shocks exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles.

Compatibility List